Demonstration of two-point velocity measurement using diffraction grating elements for integrated multi-point differential laser Doppler velocimeter

We have proposed a configuration of an integrated multi-point differential laser Doppler velocimeter (LDV) using arrayed waveguide gratings (AWGs) as grating elements. This paper demonstrates two-point velocity measurement using the proposed configuration with diffraction grating elements. An experiment was conducted using a free-space optical setup with bulk diffraction gratings instead of AWGs. The experimental results indicate that velocities at different positions can be measured using the proposed configuration. The measured separation of the two measurement positions was about 20.5 mm, about 11% of the working distance.     

Research on speckle noise of laser Doppler velocimeter for the vehicle self-contained navigation

A novel multipoint layer-type laser Doppler velocimeter (MLLDV) is designed to measure the velocity of a vehicle for the self-contained navigation system. In order to investigate the speckle's influence on the Doppler spectrum, formulas of time-lagged covariance and speckle broadening were derived for our MLLDV. Simulations and experiments are made for detailed analysis. The results show that the time-lagged covariance of photocurrent is directly proportional to the incident angle, and is inversely proportional to the elevation fluctuation of the ground together with the velocity of the vehicle. Speckle broadening is a function of the vehicle's velocity, the 1/e² Gaussian spot radius and the phase correlation length of the ground. For our MLLDV, Doppler frequency and Doppler broadening are both directly proportional to the velocity of the vehicle. Besides, the ratio between Doppler broadening and the corresponding Doppler frequency is about 0.72% when the speed of the vehicle varies from 0 to 9.6 m/s.     

Current-induced modification of spin wave mode interference

We have studied the effect of adiabatic spin-transfer torque on mode interference of spin waves. The mode interference generates amplitude-localized spots at special positions which do not move with time. When applying current, the wavevector of spin wave is modified, resulting in current-dependent displacement of amplitude-localized spots. This current-dependent change in the mode interference may allow to probe current-induced spin wave Doppler shift in space-domain. In favorable situations, it can be used to estimate the intrinsic properties of magnetic materials such as spin polarization.     

狭义相对论教学中的几个问题

本文讨论了相对论教学中几个方面的问题,包括常见例子的问题,洛伦兹变换的方便形式,同时相对性例子在另一参考系的讨论,长度测量在另一参考系看到的现象,时间延缓及运动参考系各点时间不同和光的多普勒效应的简单推导.通过不同过程在不同参考系中的讨论,掌握在运动系讨论问题的方法,以及同一过程在不同惯性系内的不同表现,而所有现象的测量结论在洛伦兹变换下保持不变.     

In situ measurement on nonuniform velocity distributionin external detonation exhaust flow by analysis ofspectrum features using TDLAS

Instantaneous and precise velocity sensing is a critical part of research on detonation mechanism and flow evolution.This paper presents a novel multi-projection tunable diode laser absorption spectroscopy solution,to provide a real-time and reliable measurement of velocity distribution in detonation exhaust flow with obvious nonuniformity.Relations are established between overlapped spectrums along probing beams and Gauss velocity distribution phantom according to the frequency shifts and tiny variations in components of light-of-sight absorbance profiles at low frequencies analyzed by the fast Fourier transform.With simulated optical measurement using H2O feature at 7185.6 cm-1 carried out on a phantom generated using a simulation of two-phase detonation by a two-fluid model,this method demonstrates a satisfying performance on recovery of velocity distribution profiles in supersonic flow even with a noise equivalent absorbance up to 2×10^-3.This method is applied to the analysis of rapidly decreasing velocity during a complete working cycle in the external flow field of an air-gasoline detonation tube operating at 25 Hz,and results show the velocity in the core flow field would be much larger than the arithmetic average from traditional tunable diode laser doppler velocimetry.This proposed velocity distribution sensor would reconstruct nonuniform velocity distribution of high-speed flow in low cost and simple operations,which broadens the possibility for applications in research on the formation and propagation of external flow filed of detonation tube.     

Investigations of He implantation and subsequent annealing effects in InP

The influence of 70 keV He⁺ ion implantation and subsequent annealing of Cz-indium phosphide (InP) samples has been investigated using a slow positron beam-based Doppler broadening spectrometer. Three samples with ion fluences of 1 × 10¹⁶, 5 × 10¹⁶ and 1 × 10¹⁷ cm⁻² were studied in the as-implanted condition as well as after annealing at 640 °C for times between 5 and 40 min. It was found that the line-shape parameter of the positron-electron annihilation peak in the implanted layer increases after 5 min annealing, then after longer annealing times it starts to decline gradually until it reaches a value close to the value of the as-grown sample. This implies that vacancy-like defects can be created in InP by He implantation followed by short-thermal annealing at T > 600 °C. Comparison of the results with a study where cavities were observed in He-implanted InP has been carried out.     

Proton induced thermal stress-wave measurements using a Laser Doppler Vibrometer

Thermal stress-waves are generated in the solid target material when the proton beam interacts. These stress waves excite natural oscillations of the target or cause plastic deformations. Hence, an experimental setup with a laser Doppler vibrometer [CITE] was developed to investigate free surface vibrations of cylindrical targets. The target configurations for RIB and conventional neutrino beams (CNGS project) were investigated to analyze proton induced thermal stress-wave generation and propagation.     

激光光栅多普勒效应微小振动测量

为了提高测量微小振动的精度和动态范围，提出一种基于激光光栅多普勒效应的微振动测量系统。通过对差拍信号的频率分析，以峰值频率比值的方法可以排除干扰获得被测振动频率，找到振动的翻转点并判断振幅的大小；推导了在翻转点附近的微小位移与电压值的关系，对于小于计数当量值的位移由测量电压得到，提高了微小振动位移的测量精度以及系统测量的最小分辨率、动态范围。实验系统的频率范围为0．5～500Hz，振幅为20～10mm，相对误差小于1％，其动态范围大于100dB。     

171Ta高自旋态能级寿命测量

在中国原子能科学研究院的HI 13串列加速器上通过157Gd(19F,5n)171Ta重离子熔合蒸发反应布居了171Ta的高自旋态,以多普勒移动衰减法的峰形分析法分析了171Tah9/2质子1/2[541]转动带的6条能级的寿命,得到了这6条能级的平均寿命值. The high spin states of~(171)Ta have been populated via heavy ion fusion evaporation reaction~(157)Gd(~(19)F, 5n)~(171)Ta at the HI-13 tandem accelerator in China Institute of Atomic Energy. The lifetimes of the high spin states in~(171)Ta have been measured by using the Doppler Shift Attenuation Method (DSAM). Six levels of its h_(9/2) proton 1/2\ band have been analyzed and their lifetimes have been deduced from the experimental data.     

Measurement of acoustic particle velocities in enclosed sound field: Assessment of two Laser Doppler Velocimetry measuring systems

The performances of two Laser Doppler Velocimetry (LDV) systems adapted for measuring the acoustic particle velocities are assessed in enclosed sound field. This assessment is performed by comparing the acoustic velocities measured by means of LDV to reference acoustic velocities estimated from sound pressure measurements. The two LDV systems are based on a single optical bench which delivers an optical signal called Doppler signal. The Doppler signal, which is frequency modulated, is analyzed by means of two signal processing systems, the BSA (Burst Spectrum Analyser from Dantec) on the one hand, and a system specifically developed for the estimation of the acoustic velocity on the other hand. Once the experimental setup has been optimized for minimizing the errors made on the reference velocities, the assessment is performed and shows that both systems can measure the acoustic velocity in enclosed field in two the frequency ranges [0-4 kHz] and [0-2 kHz] respectively for acoustic velocity amplitudes of 10 mm/s and 1 mm/s.